Energizer 84020 12V All-In-One Jump-Start System

With wintertime and dead batteries that will not turn over a car or truck's starter motor now is as good a time as any to learn how to jump start your auto with electrical booster cables. True you can wait for your local auto league if you have a membership on order with the auto club or you can await roadside assistance that came with your new car from the dealership but no doubt in the coldest of winter you can wait, wait and wait and wait for the tow trucker or auto boost vehicle. It might just be a good skill to have - to be able to start your car quickly and safely with no damage to your automobile's electrical system. Now is as good a time as any to get it right.

Fist things first. Ensure that the two vehicles are not touching in any way at their bumpers. While it is true that most autos now have plastic and plastic covered bumpers you can never be too sure or careful. Next make it a solid point to always have the two ends - the red and black ends of the jumper cables firmly apart and not touching. Otherwise sparking and short circuits will result.

Now that you are sure that the vehicles are not touching in any way and the two ends of each jumper cable are not touching as well and are safely apart, raise the car hood. Locate the battery. It is usually in the front of the engine compartment, ahead of the engine, either on the left or right front side.

Jump Starting Your Car or Truck With Battery Booster Start Cables

Locate the terminals on battery - usually on the top or at the worst on the top of the battery either side, or on the side of the battery - typically on the backwards side edge of the battery on the left and right.

The larger terminal of the two is almost always the positive battery terminal (marked with a plus that is "positive" (+) signs). That is what you will place the red colored jumper cable jaw. The other is the negative current cable. It is usually marked black in color either at the terminal or the plastic insulated lead coverings. The positive terminal may have a piece of plastic as an electrical insulating cover over it. You may have to pry this off in the cold. Cold plastic in 40 below winter weather can be quite rigid even if flexible in summer heat. Be most careful. If you use a metal screwdriver to pry off the positive terminal cover and complete an electric circuit with the screwdriver to the grounded metal of the car you might get quite a spark and a good jolt to boot.

When it comes to discussions on boosting cars there is no end to the debate if the cars should be running or not. It is personal preference. What is most important is that the final connection of the black clamp (the ground) should be to the dead battery car, not the one with the charged battery. This connection can be made to a metal part of the car firmly, or to the negative (-) battery terminal. If you connect to the live battery, especially at the battery terminal a spark can result which can light the hydrogen sulfide gasses which linger around charged and charging batteries. A serious explosion of the battery with its sulfuric acid into your face can result risking injury to yourself and even blindness.

Hence the major steps to step when boosting a dead battery with battery booster jumper cables are first to make sure the cars or their bumpers are not touching 2) Make sure that the cars are in park 3) affix the cables to the proper terminals. Finally to stress the final connection goes to the dead car's battery terminals or frame never to the vehicle with the good charged battery. Have a safe and enjoyable winter time driving season this year.

Tags : Sharp LC 40L50M Best Appliance Sale TAG Heuer CV2A10.BA0796 Carrera Automatic Watch Buy Cheap Sales

You may think that jump starting a car is a simple, no-frills process, and it can be. However, there are necessary precautions that you must take when working to do this correctly and to prevent injury. You need to know that car battery actually is a "live" thing and contains explosive hydrogen gas. Albeit while it is a small amount, it is a battery charging by-product and can be dangerous.

Here are some rules to obey when jump starting a car:

Always avoid having any flammable material that can produce sparks around a live battery. Furthermore, no live electric or flammable material should be kept around jumper cables that are in use.

Tips For Jump Starting Your Car

Remember to never hook a car battery in a position that could be considered a series circuit. If this is done, there is a high possibility your car's entire electrical system could catch fire, also ruining the starter.

When jump starting the car, make sure the batteries that are connecting have the same voltage. While most vehicles today use a 12 volt battery, some older models use batteries that have different properties.

Always ensure that the batteries that are being connected to each other have the same polarity, in that they both have the negative terminal grounded.

Keep the vehicles a reasonable distance from each other, do not let them touch.

Make sure vent cap holes are not covered or obstructed by any material.

Do not smoke while you are jump starting a car and keep lit cigarettes away from the batteries.

If you are trying to jump start a car in cold weather first make sure that the battery electrolyte is not covered in ice or frost. This is highly likely if your car's battery has been discharging liquid in cold weather.

Make sure the electrolyte fluid stays away from your skin. Contact medical care if this fluid makes skin contact.

It is important that you work to make sure you and other parties stay safe when jump starting a car. Always use your hazard lights and make sure you are pulled into a secure location or parking lot. If at all possible, avoid jump starting a car on the side of a busy road or highway in inclement or bad weather. Not only do you increase your chances of doing something wrong because you have to maneuver a car to reach a stalled vehicle, but it is dangerous to be so close to traffic.

Finally, after you are done jump starting the car and feel confident that the vehicle has been sufficiently charged, make sure you turn on the headlights, the heater and rear defroster of the jump started vehicle and the vehicle that was being used for the charge as this will help reduce the possibility of a voltage spike after the jumper cables are disconnected. A voltage spike is very common, especially in cars that have computer controls. Follow these guidelines the next time you are faced with a car that needs a jump. Know it is an easy process, but you must consider correct safety measures in order to guarantee complete safety.

Tags : Sharp PN L601B Sharp AQUOS LC70LE632U Sharp LC32SV29U New Perfumes Fragrances

Energizer 84022 12V 350 Ca Jump-Start System


*** Product Information and Prices Stored:Jun 04, 2011 16:33:22 Check Update

At one time or another, you will find that you have to be forced into jump starting a motorcycle battery. In some cases you will be able to do this from another bike, but what happens when you have to do it from a car? Here is a guide that will be able to get you back on the road easily, even if you have don't have access to another motorcycle.

A car's battery is much stronger than the one in your bike. Make sure that the car is not turned on or started since there is enough juice to fire you up. This will help to make sure the your bike doesn't suffer any damage to its starting system. It is very important that you tell the owner of the car this, since the repairs can be very costly and your bike will not start once it has received damage.

You want to connect the cable to the car's positive post first, and then to the one on your bike. Most of the time, this is going to be the red connector but you do want to visually confirm it is the right one. It is very important that you do not touch any metal since this can short the electrical system out or cause a fire.

Jump Starting A Motorcycle Battery From A Car

Connect the remaining clamp to the negative post on the car and then the other side to any metal on the bike. Make sure you are not connecting it to chrome. You may notice a small spark when you do this, but don't panic because this is fairly common.

Check the connections to make sure that they are secure and then fire your bike up. This is the easiest way to be able to succeed in jump starting a motorcycle battery from a car and get you back on the road.

Energizer 84022 12V 350 Ca Jump-Start System


*** Product Information and Prices Stored:Jun 04, 2011 16:33:25 Check Update

See Also : Soundmatters foxLv2 CHEAP DESKTOP COMPUTER SALE! Yamaha YHT-395BL Shopping How 2 Gazebo replacement canopy Mens Chronograph Watches