How to Start a Car For Temporary Car Wiring Problem
As we already know to start a car engine: the car key should be inserted in the ignition part to start the engine. However, there are times when the engine would not start due to temporary negative feedback from the wiring systems or the car has not been used for quite some time. When this occurred, the best suggestion is to use the direct connection wiring from battery to starter body to start the engine. Normally if the battery is in full charged, single direct connection should be just enough to make the engine crank and start. In order to do that, important tools below are required to perform the task.
The followings are the tools that are required in performing the above task:
1. A meter and a half long color wire (i.e. black or red)
2. A battery clip.
3. A wire cutter.
To prevent your car wiring from being damaged completely after doing the task, you need to be very careful on the mentioned steps as below:
How to Start a Car For Temporary Car Wiring Problema) Cut the wire end
b) The battery is charged and the car key is at the ON sign
c) Connect the red wire using the battery clip to the (+) battery.
d) Touch the red wire end to the car starter connector several times in order to confirm the car to start.
Once you hear the engine start, stop touching the red wire end to the car starter to prevent the damage of the whole wiring system. Seek for assistance if you have any difficulties. Follow the mentioned steps to protect the wiring from being damaged completely.
Related : SAMSUNG PN59D6500 SAMSUNG UN46C6300 CASIO F105W-1A Motorcycle Speakers Baguettes Handbags
0 comments:
Post a Comment